Pricing per 3 foot or 4 foot sections
All pricing includes pegboard back on our most popular sizes and Base Deck Shelves.

All sections and ends include uprights, backs, lower shelves, kick plates, shoes, and shoe covers.  Shelves are sold separately.

---

Gondola End Cap

Gondola End Caps for Gondola Store Shelves are configured from a single sided wall unit in a double back configuration that sits flush against a Gondola Section End creating an affordable, cost effective, and sturdy End Cap Display

---

Dividers for Store Shelves

The solution for maintaining separation of school, office and art supplies. Dividers are 3 3/4" wide x 7 3/4" high x 6 3/4" deep. The dividers clip into front shelf perforations. Minimum product width is 6". End dividers are sold separately and in pairs. 

---

Gondola Section and a Gondola End?

If you will notice via the illustrations below the Gondola Section includes everything except the second Gondola End as only one Gondola End is needed per Gondola Section when creating a multi section Gondola Aisle.  To complete the Gondola Aisle a Gondola End is Necessary.

---

Double Sided Gondola Section

To create an aisle of Double Sided Gondola as pictured in the images on the top of this page you will use the Gondola Section pieces below to configure your aisle length as the sections are available in either 3 or 4 foot sections and your will need an end to complete your aisle of Gondola.

A Gondola Section includes 2 lower shelves, 1 upright, 1 upright cover, 2 base shoes, 2 hardboard backs, 2 kick-plates, 2 base shoe cover, 1 upper spanner, 1 center spanner, and 1 lower spanner.

---

Gondola End

A Gondola End is used to complete a Aisle of Gondola Store Shelves.  For example a 16' Gondola Aisle will consist of 4 Gondola Sections and 1 Gondola End to complete the Aisle.

A Gondola End includes 1 upright, 2 base shoes, 2 base shoe covers, and 1 upright cover.

---

Gondola Caster Kits

Kit contains four plated casters, two caster channels, and two “Z” stabilizer bars to create a mobile Gondola section. Plated Casters replace the Upright and Base Shoe Levelers. Hardware included.

Maximum load capacity is 600 lbs. and must be evenly distributed on both sides of the Gondola. For safety, kit CANNOT be installed on a wall section.

Create a mobile gondola displayer with 1 4-foot gondola section.  $249.00

Difference between Gondola Store Shelves and Wall Shelves?

 The Gondola Store Shelves is also called Gondola Island Shelving.  Using the term island the Gondola Shelving stands in the center of the floor on as a island type product display.  The wall shelving is store shelving that is installed against a wall.

A Gondola Section includes one Basic Upright with Cap, two Base Shelves, two Kick-plates, two Back Panels and one Top, Center, and Lower Spanner. If the Gondola is 78" tall or taller, the section would also include one Splicer Spanner for two piece backs.

Gondola Island height starting at 36 inches with a maximum height of 96 inches, a deck base starting at 12 inches wide and a maximum width of 30 inches per Gondola side.

To see Gondola Island, please visit your local Ralph's Super Market, Do-it Center, Staples or Food for Less.  Most major store are outfitted with Madix store fixtures for a reason.

Gondola store shelves will work with most any product line such as: Pet Supplies, Electronic Stores, Meat Market, Butcher Shop, Hardware store, Convenience Store, Office Supply, Auto Parts store, Book Stores, Music Stores, Specialty Stores, Bait and Tackle Stores, Computer Stores,  and Paint Supply Stores.

Gondola Store Shelves

Gondola Shelving provides retailers with a number of options for customizing  each store's fixture lay out.  Whether you need Gondola Store Shelves, Wall Shelving, End Caps or Three and Four-Way Merchandisers; We sell components engineered of materials and finishes that complement varying retail styles.

Our gondola store shelves and shelving are strong and versatile.  Each shelf has slim sturdy, multi-position steel brackets that allow the shelf to be used in multiple merchandising arrangements.  The shelf diversity provides increased product visibility while reducing the wasted space caused by bulky brackets.

The thousands of accessories available for Gondola store shelves or Wall Shelves and Shelving address the particular needs of each store.  All parts and accessories install easily

---

Gondola Heights available in:

36 Inches - 42 Inches - 48 Inches
54 Inches - 60 Inches - 66 Inches
70 Inches - 72 Inches - 78 Inches
84 Inches - 90 Inches - 96 Inches

---

Gondola Base and Upper Shelf Depths available in:

12 Inches - 14 Inches - 16 Inches
18 Inches - 20 Inches - 22 Inches
24 Inches - 30 Inches